MFM Building Products Corp
DeckWrap PowerBond, manufactured by MFM Building Products, is a self-adhering waterproofing membrane engineered to protect from premature rot and degradation. The PowerBond adhesive aggressively adheres to untreated, treated and synthetic wood types in temperatures as low as 25°F. It is ideal for use with posts whether they are in-ground, on a concrete pad, or attached to a metal bracket. Other applications include waterproofing ledger boards, joist tops, and joist ends.
Perma-Column® and Sturdi-Wall®: Treat yourself and your projects better. Treated lumber prices are skyrocketing while availability has hit rock bottom. Perma-Column® precast concrete columns and Sturdi-Wall® anchor brackets are the post-framing solutions of choice. Get your projects back on track. Readily available nationwide. Build better. Build stronger. Build to last.
Ply-Foil is a multi-layer, reflective insulation for use in specialty and standard construction projects. Two outer layers reflect 97% of radiant heat. Each layer of foil is bonded to a layer of polyethylene for strength. Inner layers resist conductive heat flow while a center layer of polyethylene gives Ply-Foil additional strength. Perfect for new construction or retrofit.
Infinity Shield™ is offered in standard rolls of 4’x125’ Single Bubble Foil/Foil, Double Bubble Foil/Foil, Single Bubble White/Foil and Double Bubble White/Foil. We also manufacture a no seam 6’x125’ and 8’x125’ roll version of all the available SKUs. Infinity Shield™ is cost efficient and hassle-free. Additionally, the standard crushed edge tab (2”) will result in simplified overlapping. Our ultra-white bubble has a more opaque finish — a result of additives throughout all layers of the bubble.
800-360-6467 ext. 5
FootingPad by AG-CO
FootingPad brand isolated post footings has introduced a 20” diameter footing. With over 300,000 sold, FootingPad has reduced the labor cost in thousands of buildings. These composite footings are lightweight and easy to use, saving labor and equipment wear and tear. The new 20” FootingPad has a load capacity of over 6,500 pounds and joins a line of four other sizes, with the largest, 24”, carrying loads over 9,300 pounds!
Dr!pStop is the absolute BEST WAY to handle condensation in uninsulated metal buildings; it fights condensation without insulation. Specially designed air pockets store condensation and hold it overnight, then it evaporates back into the air as humidity. Since Dr!pStop arrives on the jobsite already installed, it is not only safer, but it saves the time and labor costs of installing insulation. It also protects the steel by adding another layer of protection from the corrosive elements found in livestock confinement.
Graber Post Buildings
Graber Post Buildings Inc. has been known for more than 30 years as a producer and supplier of quality building products to the post-frame industry. GPB Nail Lam column is another one of its top-quality products. This column has a #1 SPIB certified finger joint and GPB’s program is inspected to ensure that its columns meet the high standards that its customers expect. GPB Nail Lam Columns will save you time and money on your next project.
Starwood Rafters’ laminated wood products include Lam-Ply Truss, the company’s most popular product. It combines plywood with glulams and dimensional lumber for stronger trusses that can be spaced farther apart. It can be used in many applications.
“Get” that all pressure-treated wood in ground contact will fail and that all “alternative” foundations are designed to “separate wood from ground contact.” You’ll “go” Post Protector! All the goodness of post frame… simplicity, speed, in-ground strength, DIY friendliness, and of course, value… just without the ground contact.
Glue-laminated arches, beams, posts, and timber trusses manufactured by Rigidply Rafters give beauty a completely new meaning. Rigidply also manufactures metal-plated roof and floor trusses, tongue-and-groove and V-groove decking, and offers a complete line of post-frame building materials to complete your project.
Richland Laminated Columns
Manufacture/Wholesale. We make and distribute Glulam Poles, Nailam Poles, Perma-Column precast concrete bases, Sturdi-Wall brackets, Greenpost/PlanetSaver post wrap, Post Protector/Grade Guard Sleeves and The Footing Pad. With several different foundation options available for your post frame buildings, turn to Richland Laminated Columns for the most trusted and recognized products available. We offer sales and service nationally.
rFOIL Insulation Products (Covertech)
rFOIL Reflective Insulation is a single or double layer of heavy-duty polyethylene bubble, bonded to two metalized foil sheets. A white interior facing is an option. rFOIL is designed to control heat gain/loss, and prevent interior condensation in all types of post frame, metal building and metal roofing applications. rFOIL provides the best defense against the radiant heat gain/loss that occurs commonly in these systems. The key is the aluminized surface(s), which block 96% of radiant heat transfer.
Truss Components of WA
Truss Components of WA has been providing our customers with roof and floor trusses since 1992. Now, along with roof and floor trusses, we are providing its customers with pre-manufactured wall panels. Specifically designed for each project, they significantly reduce framing time. In addition, they reduce job site waste and theft.
GreenPost by PlanetSaver
GreenPost from PlanetSaver Industries is an affordable, all-in-one solution for in-ground post decay, treatment retention and uplift restraint. GreenPost double-layer wrap is factory heat-sealed to the lumber, and delivered ready to install with uplift restraint notches. When used with cement, this technique provides maximum anchorage characteristics, resisting post withdrawal generated by wind load. It is non-toxic, environmentally friendly and termite tested.
GreenPost applicators: Richland Laminated Columns LLC, Ohio, (419.895.0036) and Structural Glulam LLC, Pennsylvania, (717.355.9813).
Plasti-Sleeve Post Protection
First on the market by many years, Plasti-Sleeve literally created the foundation alternative category for post-frame construction. The clean fitting, easy-to-use, slide-on Post Protection sleeves provide the economical protection that many post-frame customers now expect. Quality black polyethylene plastic, more than 20 specialized sizes, and great pricing make Plasti-Sleeve a smart choice for post protection. Market leadership has continued with Short-Sleeve, for economical grade-level post protection, and Plasti-Skirt, an easy-to-use plastic skirt board protector.
Levi’s Building Components
Uplift Plates from Levi’s Building Components are designed to help the post-frame builder save time, money and meet or exceed the post uplift requirements for concreted posts. These inexpensive plates can be field applied with just a framing hammer, eliminating the need for extra tools and time associated with rebar and other uplift technology. They’re lightweight, easy to handle and easy to install. They are low cost and stronger than rebar and protect the center of the post by eliminating exposure to the elements, thereby resisting decay.
Extrutech Plastics, Inc.
The Extrutech Plastics “stay-in-place” concrete form for poured walls is pre-cut to project specifications and snaps together with a double-spline E-locking system. The Extrutech FORM offers an easy-to-clean sanitary surface on both sides. The product creates a structural wall system that is builder- and customer-friendly for use in dairies, car washes or food facilities. Initially designed for 6” poured walls, it is also now available for 8” walls.
Northwestern Ohio Foam Products (NOFP)
Northwestern Ohio Foam Products manufactures high-performance insulation for the agricultural, residential, commercial and industrial construction markets. MicroFoil, Solex, and Performance Star lines of reflective material are high-quality products offering outstanding features and benefits, including multiple options and R-Values for all your building needs. The Barrier Radiant Floor Under Slab Insulation provides an ideal solution for radiant-heated slab projects.
United Steel Supply
United Steel Supply provides high-quality flat rolled steel coils. We offer superior customer service, competitive pricing, and just-in-time delivery, allowing us to achieve the highest level of customer satisfaction. United Steel Supply offers Galvalume®, galvanized, and prepainted steel coils for metal roofing and siding applications in the agricultural, commercial, industrial, and residential markets.
Hitz Halter insulation is the choice for all below-grade applications. Its 3mil film on each side and termiticide-treated foam add long lasting value to your building. And the 4’ x 24’ fanfold sheets, with PEX and rebar spacings marked for you, make it a breeze to install.
Kennedy Insulation Group
Versola Reflective Insulation is produced by Kennedy Insulation Group here in the Midwest part of the United States using a specialized product formulation to prevent against degradation and deterioration. Our product has been rigorously tested and is RIMA verified. Our facility boasts a dedicated 7 layer bubble film lamination machine to produce 4 and 6 foot seamless rolls. We believe we have the highest quality product in the market today because insulation is ALL we do!
CertaSeal INT™ is a water-based, liquid acrylic, spray-on air sealing solution that provides code-compliant airtightness. Use it to fill and seal any void, cracks, or penetration in a residential building envelope to help reduce air leakage in and out of the home. It also improves energy efficiency, indoor air quality and acoustical comfort for customers and buyers.
Provide a complete line of foundation needs for Post Frame Buildings. Precast concrete center guides and columns (Perma-Column), concrete anchoring systems and associated hardware for both dry set or wet set brackets (Sturdi-Wall), laminated wood columns and foundation pads (concrete or composite).
LP Building Solutions
LP® NovaCore™ Thermal Insulated Sheathing is dual-layered and designed to protect structures against heat loss and gain. Structural OSB and XPS foam are bonded together to create an insulated wall panel that is easy to install and can be handled, cut and drilled like OSB, delivering an R-Value of 5 per inch of thickness. Provided that all panel edges are properly supported, LP NovaCore can be installed in vertical or horizontal orientations.